These special glands are designed in order to guard cables of machines and installations EMC/Nickel-plate. They help in ensuring that cables are not affected by dust and water among other destructive factors. However, it is not only about protection: They help to avoid the devastation of bad electric signals as well. We even endow these cable glands with toughness and smartness, so that the industries may be confident that the machines would operate, without any hitch. Our HongXiang m20 brass cable gland is small enough to make sure that everything stays in place and safe its cables when used in harsh conditions such as a factory, power plant or large machine.
Installed glands which fail to work well may result in the loss of signal, damages to the cables or even dangerous occurrences. One of the most common issues is to install a gland of incorrect size on the cable, etc. Based on this condition, the gland is not supposed to be excessively large or excessive small because it may fail to hold your cable and thus this may lead to dust, water or any other harmful substances accessing inside. The first step that can be taken to avoid this is to measure the size of cable correctly and choose the right gland size first.
The other issue is that the gland was not correctly torqued down. Unless that gland is screwed in, it will not cover the cable well and water or dirt will be getting in. In the long term, this may cause short circuiting or corrosion. When fitting, make the gland hard, but not too hard, so as to break. A hint here is that you should follow the instructions of your gland maker and should you buy the double compression brass cable gland in HongXiang it has the instructions written very clearly in their products so that you can put it on the spot and correctly.
In other cases, installers fail to check the type of the cable they are using. The cables contain some unique EMC glands to suit certain electrical nature or conditions. The wrong kind of a gland may result in the ineffectiveness of performance of the cabling and can also pose a safety risk. The type of gland must always be as per cable type, and the environment it is to be used in. An example is provided in that when the cable is in a wet or dusty space, you need to select a waterproof and dust-proof gland.
The choice of EMC cable glands should be such that one should be certified and must adhere to safety standards. The Certified A certification means that the cable gland undergoes inspection by the professionals and it is up to the requirements of safe and correct functioning. EMC certified cable glands minimize the chances of accident, electricity or equipment causes of mishap. But what can you tell of a cable gland, whether it has been certified and is fit to be used? These are just the simplest methods of determining approved EMC cable gland when you order a HongXiang brass cable gland.
Copyright © Zhejiang Hongxiang Connector Co., Ltd. All Rights Reserved - Privacy Policy
EN
