PG16 wire glands are quite compact but very essential elements of a wiring system. Cable glands are the parts that hold and protect wires coming out of the machines or boxes. If there are no cable glands, wires can loosen or break, which will result in short circuits or water getting inside
HongXiang has a line of high-quality and long-lasting PG16 cable glands that will be your trusty soldier for a long time. These pvc gland pg 16 are designed to protect the wire in a tight spot from dust, dirt, and water. When the wires are sealed with a proper cable gland, a system will work better and have a longer lifespan. So, by choosing the right one, like the PG16, you can be sure that it will be safe for a lot of electrical works in houses as well as in big factories.
Water can destroy cables when they run outside or in wet areas. PG16 cable glands are great at preventing water ingress. They come with special parts that squeeze around the cable tightly, forming a watertight seal. This prevents water droplets or splashes from entering the machine or electrical box. For instance, if you have a light outside or a pump near water, the cords must be protected so that flow of electricity is not short-circuited by water or they don’t rust. PG16 cable glands of HongXiang are made of good quality materials which do not turn hard in rainy and humid weather. When it rains, or when they are in damp environments, many cables become wet – but not with the right gland where water is retained outside. The snugger fit also prevents dust and bugs from slipping in, which can be a problem as well.
Besides them being simple products, the STUCK also recommends that they should be appropriate for the application of the purpose. If not, you can have serious consequences. Another failure that is simply overlooked most of the time is that of a gland which is not properly fastened. A loose gland means no sealing, and thus water or dust can ingress. Sometimes people may be too enthusiastic and finally they break the cable or the gland itself. What this will produce is the breakage of the seal or the cutting of the cable's protective layer. An additional problem is if a wrong-size gland is chosen for a particular cable. If the gland is too large, it could also be that there is no cable that is thick enough to fully fill the gland
If the size is too small, then you risk not only forcibly fitting the cable and thus damaging it but also taking the risk of the cable suddenly coming loose during use. HongXiang has a comprehensive sizing table that will make it easy for you to choose the right gland for the cable diameter. Besides that, the installer may be thinking that it is not necessary to cut the outer jacket of the cable properly.
PG16 cable glands are probably one of the essential things to maintain a safe environment in electric systems. The electric current should be properly insulated in its wire against any kind of external pollutant, for example, dust, water, and wear. Here is a place where PG16 cable glands can rescue the situation. Basically, their work is to ensure and make it firm cables in the areas where they come from either connection boxes or are machines. The "PG16" is the size of the gland that can be suitable for cords which are 10 to 14 millimeters in width, approximately
The PG16 wire cable is the luckiest one to have a metal cover. The cover is also the one that protects wires from breaking and getting detachments, which, in turn, could be the reason for short circuits or electrical shocks suddenly. What is more, the seals or O-rings will be located in the metal parts of the PG16 cable gland metal to prevent water, dust, and dirt from coming into the electrical boxes.
There could be a situation where the standard cable glands might not be adequate to fulfill the requirements of your electrical projects. This is precisely the reason why custom PG16 cable glands are very useful. The word customizable means that you can change the size, shape, material, and color of the cable gland so that it matches the requirements of your job perfectly. As an example, if you are working in a place that is hot and wet, you might need a cable gland made out of a certain plastic or metal that can resist the heat and water better than the usual ones. HongXiang offers various material customizable PG16 cable glands, like nylon, stainless steel, or brass, to name a few.
We hold independent patents such as ZL201020530888.7 for advanced cable gland designs, supported by strong mold design and product innovation capabilities, allowing us to offer customized, high‑precision metal connectors for diverse industrial applications.
All products comply with UL, CE, RoHS, TUV, ATEX, IP68, and other key international certifications, and are tested in accordance with German DIN, VDE, American UL, and European EN standards, ensuring safety, durability, and global market acceptance.
Since establishment, we have contributed to major national projects like China’s first aircraft carrier and built trusted partnerships with leading companies including Yutong Bus, Philips, ABB, and OPPLE, validating our reliability and product excellence.
With a portfolio covering stainless steel, nylon, brass, and photovoltaic‑grade materials, we serve over 30 countries and provide end‑to‑end solutions—from R&D and manufacturing to installation and after‑sales—positioning us as a one‑stop global partner for cable connectivity needs.
Copyright © Zhejiang Hongxiang Connector Co., Ltd. All Rights Reserved - Privacy Policy
EN
