In the case of the electrical wires, it is a must that you have the right parts so as to make sure that everything is safe and secure. One such item is known as a 1/2 inch NPT cable gland. This little but essential part protects cables at their juncture with machines or boxes. It keeps the dust and the water away from the point of contact, and also, if it is a cable that you are connecting, it does not become loose or you do not get the cable damaged. Apart from this, we have taken the efforts to make sure these cable glands are made in a very good manner, thus they not only fit tightly but also have a very long life. Such cable glands may look simple, you might think, but they carry out an important function to keep the electrical systems running without any problems. Now, let's find out more about the 1/2 inch NPT cable glands, why it is so great and, just to give a warning, some of the problems that people have when installing them.
1/2 inch Cable Gland NPT is the cover that can protect and secure the electrical cables. The "1/2 inch" denotes the size of the thread where it is screwed into a box or panel, and "NPT" is short for National Pipe Thread, which is the type of thread that is used in most industries. This gland is the one that will accommodate the passing cable through a hole with this size of the thread. Its main function is not to allow the cord to move out of the box, as well as not to let anything like dust or water get inside the box. That is what makes the system stable and efficient. One of the main advantages is that it is completely waterproof, and thus the inside of the cable remains dry even if it is outdoors under the rain or on damp ground. Besides that, the cable slipping is less because of the cable gland. If the cable is allowed to move too much, it may break or even become disconnected, which will then become a troublesome situation.
HongXiang's 1/2 inch NPT brass cable gland have been made for ruggedness (as one can expect) and thus are constructed of robust materials such as metal or very hard plastic to assure the users of their longevity even in the ‘tough’ spots. Besides that they prevent firing or short circuit by allowing the area to stay safe, clean, and dry. On some occasions, however, if cables are forcibly pulled or bent, the gland firmly holds the cable to provide support. In other words, fewer repairs and safer machines are the results of this. Additionally, these glands are easy to apply and can be utilized in most of the cables, which can be used within your homes and factories outside. Their design allows water to be kept out while still allowing air to flow, so that cables are not wet and can breathe a little. In essence, this small piece is the one that makes it possible for huge systems to operate safely and also to avert such big incidents. With HongXiang cable glands, such problems will not arise because they are made with precision and care thus providing that your job can be kept safe all the time.
In a way, 1/2-inch NPT cable glands are pretty simple; however, they can still be quite annoying if they are not installed properly. Mistakes that are commonly made include the use of a gland size that is too large than the cable or the hole. Sealing the gland properly is impossible if it is too small or too large. Thus, water or dust can enter the space and wear the wires that are inside. In some instances, the person who is responsible for the wiring does not tighten the gland enough so that it can be pulled out easily. If cable glands are not tight enough, the cable may be moved or water may enter. At HongXiang, we are convinced that you need to measure before buying and installing. Any other issues? Don’t try to not strip the cable when you are putting it in the gland. By removing too much of the cable insulation, the wires may short against the parts. If not enough is cut, however, the gland will not be able to grip the cable properly. Sometimes, the installers have the wrong notion that they don’t need proper tools. Using the wrong wrench or just too much force to tighten the gland can result in it being cracked or its threads being damaged. It would be of great help if you have a real wrench and the instruction. The dirt or damage of threads on the gland or the box can also be reasons for the failure of the gland to close tightly. By putting a cleaner into the threads before tightening, you preserve the perfect fit
The other issue is the ignorance of the environment through which the gland is going to pass. If a cable gland is used outside and it is not recognized as water-resistant, then it will break very soon. HongXiang produces glands for different situations, so it is significant to select the right one for your working place.
Material selection plays an important role when dealing with 1/2 inch NPT cable glands. Our aluminum cable gland is used to protect cables when they are taken into machines or electrical boxes. They ensure that cables are free from dust, water, and other harmful agents. For this reason, the cable glands have to be made of very strong and durable materials
Stainless steel is only one of the popular materials that HongXiang makes for these cable glands. The most common stainless steel is very resistant to corrosion and easy to assemble. It is appropriate for wet or humid conditions, which makes it practical in environments such as factories or the outdoors.
1/2 inch NPT cable gland price will be different if you compare it to 2024, and the factors mentioned above are the reasons. Most of the people who would be interested in buying cable glands are those that would buy in bulk and a term is used to describe this type of purchasing which is called wholesale purchase. When you place a wholesale order instead of placing one order at a time, the price per unit is lower on average. HongXiang is monitoring the price changes closely so that buyers can take advantage of the best deals available. If you experience a surge in the price of stainless steel or brass and the same materials are used in the production of cable glands then it means that cable glands production will be more expensive. The company said this could lead to price increments for end-users. On the contrary, if materials are more affordable, then lower prices can be expected
One more reason of the price changes is the price of manufacturing and shipping the cable glands. If a factory has modern machinery or a quicker production line for cable glands, it means that fewer units will have to bear the production costs and as a result, the price can go down. Price fluctuations can also be based on shipping costs. If the export is expensive due to fuel cost etc., it means you will be spending more on cable glands. In contrast, if shipping becomes less costly or faster, prices may go down
Growth is not only happening to technologies but also industries, and more people will need cable glands in 2024. For instance, there are cable glands to protect their cables at factories, construction sites and power stations. Prices can go up a little bit when the demand is extremely high. But if there are a lot of companies that manufacture cable glands and compete with each other, prices can stay low. Wholesale buyers will be on the receiving end of a bargain most of the time, especially if the orders are large. This is excellent as customers will be able to save money even though they are still getting the best quality half in NPT cable glands. If clients choose to purchase from HongXiang, they do not have to worry about surprise price fluctuating or poor quality. To sum it up, 2024 is a year when the price of 1/2" NPT cable glands is determined by the material used, the production process, and the export. To keep abreast of these changes and to offer the best price with quality products to all customers is part of HongXiang’s philosophy.
Copyright © Zhejiang Hongxiang Connector Co., Ltd. All Rights Reserved - Privacy Policy
EN
