EN
Metalen kabelgland
Duurzaam materiaal: Vervaardigd uit hoogwaardige metalen zoals messing en roestvrij staal, met hoge mechanische weerstand, slagvastheid, slijtvastheid en corrosiebestendigheid. Aanpasbaar aan zware industriële omgevingen zoals hoge temperaturen, vochtigheid en stof, voor een lange levensduur.
Uitstekende beveiligingsprestaties: Voorzien van een volledige afdichtingsstructuur, meestal met een beschermingsgraad IP65+ (sommige hoogwaardige modellen bereiken IP67/IP68). Biedt effectief bescherming tegen stof, water, olie en corrosie, en beschermt kabelmoffen en interne aders volledig.
Veilige en robuuste verbinding: Voorzien van hoogwaardige klemcomponenten; sommige modellen hebben een dubbele vergrendeling of antislipontwerp, wat uitstekende trek-, trillings- en torsiebestendigheid biedt. Houdt kabels stevig vast om losraken of losschieten te voorkomen door langdurig gebruik of externe krachten.
Brede toepassingscompatibiliteit: Compatibel met verschillende kabelspecificaties en draadstandaarden (metrisch, imperiaal, Amerikaans, etc.). Eenvoudig te installeren (meestal handmatig monteerbaar), veel gebruikt in industriële automatisering, elektriciteit, chemische industrie, scheepvaart, buitenengineering en andere toepassingen.
- Overzicht
- Specificaties
- Beschrijving
- Aanbevolen producten
Overzicht
Productparameter
Welkom op onze website, we zijn blij u van dienst te kunnen zijn
| Passend materiaal: | Verchroomd messing | |||||
| Materiaal voor klemmen: | PA66 (Nylon), UL94-V2 | |||||
| Materiaal voor afdichtingsonderdelen: | EPDM, siliconenrubber | |||||
| O-ring materiaal: | EPDM, siliconenrubber | |||||
| Beschermingsgraad: | IP66-10 bar | |||||
| Temperatuur: |
Statische toestand: -40 tot 100℃, kortstondig tot 120℃ Dynamische toestand: -20℃ tot 80℃, kortstondig tot 100℃ |
|||||
Specificaties
eenheid:mm
| Artikel | Bereik | G Ldraadlengte | AG-Draadbuitendiameter | HVerbindingslengte | Bijzengrootte | Code |
| M10×1,0 | 3-6.5 | 6.5 | 10.0 | 17 | 14 | HX-NP.M10 |
| M12×1.5 | 2-5 | 6.5 | 12.0 | 17 | 14 | HXNP.M12-15) |
| M12×1.5 | 3-6.5 | 6.5 | 12.0 | 17 | 14 | HX-NP.M12 |
| M12×1.5 | 4-8 | 8 | 12.0 | 18 | 17/14 | HX-NP.M12-8 |
| M14×1.5 | 3-6 | 8 | 14.0 | 18 | 17 | HX-NP.M14-(6) |
| M14×1.5 | 4-8 | 8 | 14.0 | 18 | 17 | HX-NP.M14 |
| M14×1.5 | 5-10 | 8 | 14.0 | 19 | 20/17 | HX-NP.M1410 |
| M16×1.5 | 3-6 | 8 | 16.0 | 19 | 18 | HXNP.M16-(6) |
| M16×1.5 | 4.8 | 8 | 16.0 | 19 | 18 | HX-NP.M16 |
| M16×1.5 | 5-10 | 8 | 16.0 | 19 | 20/18 | HXNP.M16-10 |
| M18×1,5 | 4-8 | 8 | 18.9 | 20 | 20 | HX-NP.M18-(8) |
| M18×1,5 | 5-10 | 8 | 18.0 | 20 | 20 | HX-NP.M18 |
| M18×1,5 | 6-12 | 8 | 18.0 | 21 | 20 | HX-NP.M18-12 |
| M20×1.5 | 5-10 | 8 | 20.0 | 21 | 22 | HX-NP.M20-(10) |
| M20×1.5 | 6-12 | 8 | 20.0 | 21 | 22 | HX-NP.M20 |
| M20×1.5 | 10-14 | 8 | 20.0 | 22 | 24/22 | HX-NP.M20-14 |
| M20×1.5 | 12-16 | 8 | 20.0 | 25 | 2722 | HX-NP.M20-16 |
| M22×1.5 | 4-8 | 8 | 22.0 | 22 | 24 | HX-NP.M22-8) |
| M22×1.5 | 8-12 | 8 | 22.0 | 22 | 24 | HX-NP.M22-(12) |
| M22×1.5 | 10-14 | 8 | 22.0 | 22 | 24 | HX-NP.M22 |
| M22×1.5 | 12-16 | 8 | 22.0 | 25 | 27/24 | HX-NP.M22-16 |
| M24×1.5 | 8-12 | 9 | 24.0 | 22 | 24/27 | HX-NP.M24-(12) |
| M24×1.5 | 10-14 | 9 | 24.0 | 22 | 24/27 | HX-NP.M24 |
| M24×1.5 | 12-16 | 9 | 24.0 | 22 | 27 | HX-NP.M24-16 |
| M25×1.5 | 10-14 | 9 | 25.0 | 22 | 24/27 | HX-NP.M25-14 |
| M25×1.5 | 12-16 | 9 | 25.0 | 25 | 27 | HX-NP.M25-16 |
| M25×1.5 | 13-18 | 9 | 25.0 | 27 | 30/27 | HX-NP.M25-18 |
| M25×1.5 | 15-22 | 9 | 25.0 | 29 | 35/27 | HX-NP.M25-22 |
| M27×1.5 | 12-16 | 9 | 27.0 | 27 | 30 | HX-NP.M27-(16) |
| M27×1.5 | 13-18 | 9 | 27.0 | 27 | 30 | HX-NP.M27 |
| M30×1,5 | 13-18 | 9 | 28.0 | 27 | 30 | HX-NP.M28 |
| M30×1,5 | 13-18 | 9 | 30.0 | 27 | 30/32 | HX-NP.M30 |
| M30×1,5 | 15-22 | 9 | 30.0 | 29 | 35/32 | HX-NP.M30-22 |
| M32×1.5 | 13-18 | 10 | 32.0 | 29 | 35 | HX-NP.M32-(18) |
| M32×1.5 | 14-20 | 10 | 32.0 | 29 | 35 | HX-NPM32-(20) |
| M32×1.5 | 15-22 | 10 | 32.0 | 29 | 35 | HX-NP.M32 |
| M32×1.5 | 18-25 | 10 | 32.0 | 31 | 40/35 | HX-NP.M32-25 |
| M33×1.5 | 15-22 | 10 | 33.0 | 29 | 35/36 | HX-NP.M33 |
| M36×1.5 | 18-25 | 10 | 36.0 | 31 | 40 | HX-NP.M36 |
| M37×1.5 | 18-25 | 10 | 37.0 | 31 | 40 | HX-NP.M37 |
| M40×1.5 | 18-25 | 11 | 40.0 | 31 | 40/45 | HX-NP.M40-25 |
| M40×1.5 | 22-30 | 11 | 40.0 | 35 | 45 | HX-NP.M40-30 |
| M40×1.5 | 25-33 | 11 | 40.0 | 37 | 50/45 | HX-NP.M40-33 |
| M47×1.5 | 22-30 | 11 | 42.0 | 35 | 45 | HX-NP.M42 |
| M47×1.5 | 18-25 | 11 | 47.0 | 37 | 50 | HX-NP.M47-(25) |
| M47×1.5 | 22-30 | 11 | 47.0 | 37 | 50 | HX-NP.M47-(30) |
| M47×1.5 | 25-33 | 11 | 47.0 | 37 | 50 | HX-NPM47 |
| M48×1.5 | 25-33 | 11 | 48.0 | 37 | 50/52 | HX-NP.M48 |
| M50×1.5 | 30-35 | 13 | 50.0 | 37 | 57/55 | HX-NP.M50-35) |
| M50×1.5 | 32-38 | 13 | 50.0 | 37 | 57/55 | HX-NP.M50 |
| M50×1.5 | 3744 | 13 | 50.0 | 38 | 64/55 | HX-NP.M50-44 |
| M54×1.5 | 32-38 | 13 | 54.0 | 37 | 57 | HXNP.M54 |
| M60×1.5 | 3744 | 14 | 60.0 | 38 | 64 | HX-NP.M60 |
| M63×1,5 | 30-35 | 14 | 63.0 | 38 | 64/68 | HXNP.M63-{35) |
| M63×1,5 | 3744 | 14 | 63.0 | 38 | 64/68 | HX-NP.M63 |
| M63×1,5 | 42-52 | 14 | 63.0 | 44 | 78/68 | HX-NP.M63-52 |
| M70×2,0 | 37-44 | 14 | 64.0 | 38 | 64/68 | HX-NP.M64 |
| M70×20 | 42-52 | 16 | 70.0 | 44 | 78 | HX-NP.M70 |
| M72×2,0 | 42-52 | 16 | 72.0 | 44 | 78 | HX-NPM72 |
| M72×2,0 | 48-58 | 16 | 72.0 | 44 | 78 | HX-NP.M72-58 |
| M72×2,0 | 55-62 | 16 | 72.0 | 45 | 88/78 | HX-NP.M72-62 |
| M75×2,0 | 42-52 | 16 | 75.0 | 44 | 78/80 | HX-NP.M75 |
| M75×2,0 | 48-58 | 16 | 75.0 | 44 | 78/80 | HX-NP.M75-58 |
| M80×2.0 | 55-62 | 18 | 80.0 | 45 | 88 | HXNP.M80 |
| M88×2.0 | 65-70 | 18 | 88.0 | 45 | 94 | HX-NP.M88 |
| M90×2,0 | 65-70 | 18 | 90.0 | 45 | 94 | HX-NPM90 |
| M100×2.0 | 78-84 | 20 | 100.0 | 53 | 110 | HXNPM100 |
| M110×2.0 | 82-88 | 20 | 110.0 | 53 | 120 | HX-NP.M110 |
| M120×2.0 | 88-95 | 20 | 120.0 | 53 | 130 | HX-NP.M120 |
| Draadspecificaties kunnen worden aangepast | ||||||
| Artikel | Bereik | GL draadlengte | AG Draad Buitendiameter | HJoin-lengte | Bijzengrootte | Code | |||||
| PG7 | 2-5 | 6.5 | 12.5 | 17 | 14/15 | HXNP.PG7-(5) | |||||
| 3-6.5 | 6.5 | 12.5 | 17 | 14/15 | HXNP.PG7 | ||||||
| 48 | 8 | 12.5 | 19 | 17/15 | HXNP.PG7-8 | ||||||
| PG9 | 3-6 | 8 | 15.2 | 19 | 17/18 | HX-NP.PG9-(6) | |||||
| 48 | 8 | 15.2 | 19 | 17/18 | HX-NP.PG9 | ||||||
| 5-10 | 8 | 15.2 | 21 | 20/18 | HX-NP.PG9-10 | ||||||
| PG11 | 48 | 8 | 18.6 | 21 | 20/21 | HX-NP.PG11-(8) | |||||
| 5-10 | 8 | 18.6 | 21 | 20/21 | HX-NP.PG11 | ||||||
| 6-12 | 8 | 18.6 | 22 | 22/21 | HX-NPPG11-12 | ||||||
| Pg13.5 | 5-10 | 8 | 20.4 | 22 | 22/23 | HX-NP.PG13.5-(10) | |||||
| 6-1210-14 | 88 | 20.420.4 | 2223 | 22/2324/23 | HX-NP.PG13.5HX-NP.PG13.5-14 | ||||||
| PG16 | 6-1210-14 | 88 | 22.522.5 | 2323 | 24/2524/25 | HX-NP.PG16-(12)HX-NR.PG16 | |||||
| 12-16 | 8 | 22.5 | 27 | 27/25 | HX-NP.PG16-16 | ||||||
| PG19 | 10-14 | 9 | 25.0 | 25 | 24/27 | HX-NR.PG19 | |||||
| 12-16 | 9 | 25.0 | 25 | 27 | HX-NPPG19-16 | ||||||
| PG21 | 48 | 9 | 28.3 | 27 | 30 | HX-NP.PG21-(8) | |||||
| 12-16 | 9 | 28.3 | 27 | 30 | HX-NP.PG21-(16) | ||||||
| 13-18 | 9 | 28.3 | 27 | 30 | HX-NP.PG21 | ||||||
| 15-22 | 9 | 28.3 | 29 | 35/30 | HX-NP.PG21-22 | ||||||
| PG25 | 15-22 | 10 | 32.0 | 29 | 35 | HX-NP.PG25 | |||||
| PG29 | 15-22 | 10 | 37.0 | 31 | 40 | HX-NP.PG29-(22) | |||||
| 18-25 | 10 | 37.0 | 31 | 40 | HX-NP.PG29 | ||||||
| 22-30 | 10 | 37.0 | 35 | 50/45 | HX-NP.PG29-30 | ||||||
| PG36 | 18-25 | 11 | 47.0 | 37 | 50 | HX-NP.PG36-(25) | |||||
| 25-33 | 11 | 47.0 | 37 | 50 | HX-NP.PG36 | ||||||
| 32-38 | 11 | 47.0 | 37 | 57/50 | HX-NP.PG36-38 | ||||||
| PG42 | 30-35 | 13 | 54.0 | 37 | 57 | HX-NP.PG42-(35) | |||||
| 32-38 | 13 | 54.0 | 37 | 57 | HX-NP.PG42 | ||||||
| PG48 | 3744 | 14 | 59.3 | 38 | 64 | HX-NP.PG48 | |||||
| 42-52 | 14 | 59.3 | 38 | 78/64 | HX-NP.PG48-52 | ||||||
| Artikel | Bereik | GLDraadlengte | AG-Draadbuitendiameter | HVerbindingslengte | Bijzengrootte | Code | |||||
| G1/4 | 3-6.5 | 6.5 | 13.1 | 13.5 | 14/15 | HX-NPG1/4 | |||||
| G3/8 | 48 | 8 | 16.6 | 17 | 18/19 | HX-NP.G3/8 | |||||
| G1/2 | 6-12 | 8 | 20.9 | 22 | 22/23 | HX-NPG1/2 | |||||
| G3/4 | 13-18 | 9 | 26.4 | 25 | 30 | HX-NP.G3/4 | |||||
| G1 | 18-25 | 10 | 33.2 | 29 | 40 | HX-NP.G1 | |||||
| G1-1\/4 | 25-33 | 11 | 41.9 | 35 | 50 | HX-NPG1-1/4 | |||||
| G1-1\/2 | 32-38 | 12 | 47.8 | 37 | 57/55 | HX-NPG1-1/2 | |||||
| G2 | 37-44 | 14 | 59.6 | 38 | 64 | HX-NP.G2 | |||||
| G2-1/2 | 42-52 | 16 | 75.1 | 42 | 78/80 | HX-NPG2-1/2 | |||||
| G3 | 65-70 | 18 | 87.8 | 45 | 94 | HX-NP.G3 | |||||
| G4 | 88-95 | 20 | 113.0 | 53 | 130 | HX-NP.G4 | |||||
| NPT1/4 | 3-6.5 | 6.5 | 13.6 | 13.5 | 14/15 | HX-NP.NPTI/4 | |||||
| NPT3/8 | 48 | 8 | 17.0 | 17 | 18/19 | HX-NP.NPT3/8 | |||||
| NPT1/2 | 6-12 | 8 | 21.2 | 22 | 22 | HX-NP.NPT1/2 | |||||
| NPT3/4 | 13-18 | 9 | 26.5 | 25 | 30 | HX-NP.NPT3/4 | |||||
| NPT1 | 18-25 | 10 | 33.2 | 29 | 40 | HX-NP.NPT1 | |||||
| NPT1-1/4 | 25-33 | 11 | 41.9 | 35 | 50 | HX-NP.NPT1-1/4 | |||||
| NPT1-1/2 | 32-38 | 12 | 48.0 | 37 | 57 | HX-NPNPT1-1/2 | |||||
| NPT2 | 37-44 | 14 | 60.0 | 38 | 64 | HX-NP.NPT2 | |||||
| NPT2-1/2 | 42-52 | 16 | 72.6 | 42 | 78 | HX-NPNPT2-1/2 | |||||
NPT-modellen komen in een bereik van maten die op maat kunnen worden gemaakt, standaard zonder moeren en zijn optioneel.
Beschrijving
