EN
Metal na Cable Gland
Matibay na Materyal: Gawa sa de-kalidad na metal tulad ng tanso at stainless steel, na may mataas na lakas ng makina, lumalaban sa impact, pagsusuot, at korosyon. Umaaladapt sa mapanganib na kapaligiran sa industriya tulad ng mataas na temperatura, kahalumigmigan, at alikabok, na nagagarantiya ng mahabang buhay ng serbisyo.
Mahusay na Proteksyon: Mayroon itong buong sealing structure, na karaniwang nakakamit ng IP65+ protection rating (ang ilang mataas na modelo ay umabot sa IP67/IP68). Epektibong nagbibigay ng proteksyon laban sa alikabok, tubig, langis, at corrosion, na lubos na nagpoprotekta sa cable glands at mga panloob na core wires.
Ligtas at Matibay na Koneksyon: Mayroon itong high-strength clamping components; ang ilan ay gumagamit ng dual locking o anti-slip disenyo, na nag-aalok ng mahusay na tensile, anti-vibration, at anti-torque performance. Matibay na nakakabit ang mga kable upang maiwasan ang pag-loose o pagbagsak dahil sa matagalang paggamit o mga panlabas na puwersa.
Malawak na Kompatibilidad sa Aplikasyon: Compatible sa iba't ibang uri ng kable at thread standards (metric, imperial, American, at iba pa). Madaling i-install (karamihan ay maaaring isama nang manu-mano), malawakang ginagamit sa industrial automation, electric power, chemical industry, shipping, outdoor engineering, at iba pang mga sitwasyon.
- Buod
- Mga Spesipikasyon
- Paglalarawan
- Mga Inirerekomendang Produkto
Buod
Parameter ng Produkto
Maligayang Pagdating sa Aming Website, Masaya Kaming Maglingkod sa Inyo
| Materyal na Pampatong: | Tanso na may palataw na nickel | |||||
| Materyal para sa mga Jaw ng Pagsaklo: | PA66 (Nylon), UL94-V2 | |||||
| Materyal para sa mga Bahagi ng Pang-sealing: | EPDM, Silicone rubber | |||||
| Materyal ng O-ring: | EPDM, Silicone rubber | |||||
| Antas ng Proteksyon: | IP66-10 bar | |||||
| Temperatura: |
Estadong istatiko: -40 hanggang 100℃, Maikling panahon hanggang 120℃ Estadong dinamiko: -20℃ hanggang 80℃, Maikling panahon hanggang 100℃ |
|||||
Mga Spesipikasyon
unit:mm
| Item | Saklaw | Haba ng G LThread | AG Thread O.D. | H Haba ng Sali | Laki ng Spanner | Kodigo |
| M10×1.0 | 3-6.5 | 6.5 | 10.0 | 17 | 14 | HX-NP.M10 |
| M12×1.5 | 2-5 | 6.5 | 12.0 | 17 | 14 | HXNP.M12-15) |
| M12×1.5 | 3-6.5 | 6.5 | 12.0 | 17 | 14 | HX-NP.M12 |
| M12×1.5 | 4-8 | 8 | 12.0 | 18 | 17/14 | HX-NP.M12-8 |
| M14×1.5 | 3-6 | 8 | 14.0 | 18 | 17 | HX-NP.M14-(6) |
| M14×1.5 | 4-8 | 8 | 14.0 | 18 | 17 | HX-NP.M14 |
| M14×1.5 | 5-10 | 8 | 14.0 | 19 | 20/17 | HX-NP.M1410 |
| M16×1.5 | 3-6 | 8 | 16.0 | 19 | 18 | HXNP.M16-(6) |
| M16×1.5 | 4.8 | 8 | 16.0 | 19 | 18 | HX-NP.M16 |
| M16×1.5 | 5-10 | 8 | 16.0 | 19 | 20/18 | HXNP.M16-10 |
| M18×1.5 | 4-8 | 8 | 18.9 | 20 | 20 | HX-NP.M18-(8) |
| M18×1.5 | 5-10 | 8 | 18.0 | 20 | 20 | HX-NP.M18 |
| M18×1.5 | 6-12 | 8 | 18.0 | 21 | 20 | HX-NP.M18-12 |
| M20×1.5 | 5-10 | 8 | 20.0 | 21 | 22 | HX-NP.M20-(10) |
| M20×1.5 | 6-12 | 8 | 20.0 | 21 | 22 | HX-NP.M20 |
| M20×1.5 | 10-14 | 8 | 20.0 | 22 | 24/22 | HX-NP.M20-14 |
| M20×1.5 | 12-16 | 8 | 20.0 | 25 | 2722 | HX-NP.M20-16 |
| M22×1.5 | 4-8 | 8 | 22.0 | 22 | 24 | HX-NP.M22-8) |
| M22×1.5 | 8-12 | 8 | 22.0 | 22 | 24 | HX-NP.M22-(12) |
| M22×1.5 | 10-14 | 8 | 22.0 | 22 | 24 | HX-NP.M22 |
| M22×1.5 | 12-16 | 8 | 22.0 | 25 | 27/24 | HX-NP.M22-16 |
| M24×1.5 | 8-12 | 9 | 24.0 | 22 | 24/27 | HX-NP.M24-(12) |
| M24×1.5 | 10-14 | 9 | 24.0 | 22 | 24/27 | HX-NP.M24 |
| M24×1.5 | 12-16 | 9 | 24.0 | 22 | 27 | HX-NP.M24-16 |
| M25×1.5 | 10-14 | 9 | 25.0 | 22 | 24/27 | HX-NP.M25-14 |
| M25×1.5 | 12-16 | 9 | 25.0 | 25 | 27 | HX-NP.M25-16 |
| M25×1.5 | 13-18 | 9 | 25.0 | 27 | 30/27 | HX-NP.M25-18 |
| M25×1.5 | 15-22 | 9 | 25.0 | 29 | 35/27 | HX-NP.M25-22 |
| M27×1.5 | 12-16 | 9 | 27.0 | 27 | 30 | HX-NP.M27-(16) |
| M27×1.5 | 13-18 | 9 | 27.0 | 27 | 30 | HX-NP.M27 |
| M28×1.5 | 13-18 | 9 | 28.0 | 27 | 30 | HX-NP.M28 |
| M30×1.5 | 13-18 | 9 | 30.0 | 27 | 30/32 | HX-NP.M30 |
| M30×1.5 | 15-22 | 9 | 30.0 | 29 | 35/32 | HX-NP.M30-22 |
| M32×1.5 | 13-18 | 10 | 32.0 | 29 | 35 | HX-NP.M32-(18) |
| M32×1.5 | 14-20 | 10 | 32.0 | 29 | 35 | HX-NPM32-(20) |
| M32×1.5 | 15-22 | 10 | 32.0 | 29 | 35 | HX-NP.M32 |
| M32×1.5 | 18-25 | 10 | 32.0 | 31 | 40/35 | HX-NP.M32-25 |
| M42×1.5 | 15-22 | 10 | 33.0 | 29 | 35/36 | HX-NP.M33 |
| M36×1.5 | 18-25 | 10 | 36.0 | 31 | 40 | HX-NP.M36 |
| M37×1.5 | 18-25 | 10 | 37.0 | 31 | 40 | HX-NP.M37 |
| M40×1.5 | 18-25 | 11 | 40.0 | 31 | 40/45 | HX-NP.M40-25 |
| M40×1.5 | 22-30 | 11 | 40.0 | 35 | 45 | HX-NP.M40-30 |
| M40×1.5 | 25-33 | 11 | 40.0 | 37 | 50/45 | HX-NP.M40-33 |
| M42×1.5 | 22-30 | 11 | 42.0 | 35 | 45 | HX-NP.M42 |
| M47×1.5 | 18-25 | 11 | 47.0 | 37 | 50 | HX-NP.M47-(25) |
| M47×1.5 | 22-30 | 11 | 47.0 | 37 | 50 | HX-NP.M47-(30) |
| M47×1.5 | 25-33 | 11 | 47.0 | 37 | 50 | HX-NPM47 |
| M48×1.5 | 25-33 | 11 | 48.0 | 37 | 50/52 | HX-NP.M48 |
| M50×1.5 | 30-35 | 13 | 50.0 | 37 | 57/55 | HX-NP.M50-35) |
| M50×1.5 | 32-38 | 13 | 50.0 | 37 | 57/55 | HX-NP.M50 |
| M50×1.5 | 3744 | 13 | 50.0 | 38 | 64/55 | HX-NP.M50-44 |
| M54×1.5 | 32-38 | 13 | 54.0 | 37 | 57 | HXNP.M54 |
| M60×1.5 | 3744 | 14 | 60.0 | 38 | 64 | HX-NP.M60 |
| M63×1.5 | 30-35 | 14 | 63.0 | 38 | 64/68 | HXNP.M63-{35) |
| M63×1.5 | 3744 | 14 | 63.0 | 38 | 64/68 | HX-NP.M63 |
| M63×1.5 | 42-52 | 14 | 63.0 | 44 | 78/68 | HX-NP.M63-52 |
| M64×2.0 | 37-44 | 14 | 64.0 | 38 | 64/68 | HX-NP.M64 |
| M70×20 | 42-52 | 16 | 70.0 | 44 | 78 | HX-NP.M70 |
| M72×2.0 | 42-52 | 16 | 72.0 | 44 | 78 | HX-NPM72 |
| M72×2.0 | 48-58 | 16 | 72.0 | 44 | 78 | HX-NP.M72-58 |
| M72×2.0 | 55-62 | 16 | 72.0 | 45 | 88/78 | HX-NP.M72-62 |
| M75×2.0 | 42-52 | 16 | 75.0 | 44 | 78/80 | HX-NP.M75 |
| M75×2.0 | 48-58 | 16 | 75.0 | 44 | 78/80 | HX-NP.M75-58 |
| M80×2.0 | 55-62 | 18 | 80.0 | 45 | 88 | HXNP.M80 |
| M88×2.0 | 65-70 | 18 | 88.0 | 45 | 94 | HX-NP.M88 |
| M90×2.0 | 65-70 | 18 | 90.0 | 45 | 94 | HX-NPM90 |
| M100×2.0 | 78-84 | 20 | 100.0 | 53 | 110 | HXNPM100 |
| M110×2.0 | 82-88 | 20 | 110.0 | 53 | 120 | HX-NP.M110 |
| M120×2.0 | 88-95 | 20 | 120.0 | 53 | 130 | HX-NP.M120 |
| Ang mga espisipikasyon ng thread ay maaaring i-customize | ||||||
| Item | Saklaw | Haba ng GL Thread | AG Thread O.D. | Haba ng pagdikit | Laki ng Spanner | Kodigo | |||||
| PG7 | 2-5 | 6.5 | 12.5 | 17 | 14/15 | HXNP.PG7-(5) | |||||
| 3-6.5 | 6.5 | 12.5 | 17 | 14/15 | HXNP.PG7 | ||||||
| 48 | 8 | 12.5 | 19 | 17/15 | HXNP.PG7-8 | ||||||
| PG9 | 3-6 | 8 | 15.2 | 19 | 17/18 | HX-NP.PG9-(6) | |||||
| 48 | 8 | 15.2 | 19 | 17/18 | HX-NP.PG9 | ||||||
| 5-10 | 8 | 15.2 | 21 | 20/18 | HX-NP.PG9-10 | ||||||
| PG11 | 48 | 8 | 18.6 | 21 | 20/21 | HX-NP.PG11-(8) | |||||
| 5-10 | 8 | 18.6 | 21 | 20/21 | HX-NP.PG11 | ||||||
| 6-12 | 8 | 18.6 | 22 | 22/21 | HX-NPPG11-12 | ||||||
| Pg13.5 | 5-10 | 8 | 20.4 | 22 | 22/23 | HX-NP.PG13.5-(10) | |||||
| 6-1210-14 | 88 | 20.420.4 | 2223 | 22/2324/23 | HX-NP.PG13.5HX-NP.PG13.5-14 | ||||||
| PG16 | 6-1210-14 | 88 | 22.522.5 | 2323 | 24/2524/25 | HX-NP.PG16-(12)HX-NR.PG16 | |||||
| 12-16 | 8 | 22.5 | 27 | 27/25 | HX-NP.PG16-16 | ||||||
| PG19 | 10-14 | 9 | 25.0 | 25 | 24/27 | HX-NR.PG19 | |||||
| 12-16 | 9 | 25.0 | 25 | 27 | HX-NPPG19-16 | ||||||
| PG21 | 48 | 9 | 28.3 | 27 | 30 | HX-NP.PG21-(8) | |||||
| 12-16 | 9 | 28.3 | 27 | 30 | HX-NP.PG21-(16) | ||||||
| 13-18 | 9 | 28.3 | 27 | 30 | HX-NP.PG21 | ||||||
| 15-22 | 9 | 28.3 | 29 | 35/30 | HX-NP.PG21-22 | ||||||
| PG25 | 15-22 | 10 | 32.0 | 29 | 35 | HX-NP.PG25 | |||||
| PG29 | 15-22 | 10 | 37.0 | 31 | 40 | HX-NP.PG29-(22) | |||||
| 18-25 | 10 | 37.0 | 31 | 40 | HX-NP.PG29 | ||||||
| 22-30 | 10 | 37.0 | 35 | 50/45 | HX-NP.PG29-30 | ||||||
| PG36 | 18-25 | 11 | 47.0 | 37 | 50 | HX-NP.PG36-(25) | |||||
| 25-33 | 11 | 47.0 | 37 | 50 | HX-NP.PG36 | ||||||
| 32-38 | 11 | 47.0 | 37 | 57/50 | HX-NP.PG36-38 | ||||||
| PG42 | 30-35 | 13 | 54.0 | 37 | 57 | HX-NP.PG42-(35) | |||||
| 32-38 | 13 | 54.0 | 37 | 57 | HX-NP.PG42 | ||||||
| PG48 | 3744 | 14 | 59.3 | 38 | 64 | HX-NP.PG48 | |||||
| 42-52 | 14 | 59.3 | 38 | 78/64 | HX-NP.PG48-52 | ||||||
| Item | Saklaw | Haba ng GLThread | AG Thread O.D. | H Haba ng Sali | Laki ng Spanner | Kodigo | |||||
| G1/4 | 3-6.5 | 6.5 | 13.1 | 13.5 | 14/15 | HX-NPG1/4 | |||||
| G3/8 | 48 | 8 | 16.6 | 17 | 18/19 | HX-NP.G3/8 | |||||
| G1/2 | 6-12 | 8 | 20.9 | 22 | 22/23 | HX-NPG1/2 | |||||
| G3/4 | 13-18 | 9 | 26.4 | 25 | 30 | HX-NP.G3/4 | |||||
| G1 | 18-25 | 10 | 33.2 | 29 | 40 | HX-NP.G1 | |||||
| G1-1\/4 | 25-33 | 11 | 41.9 | 35 | 50 | HX-NPG1-1/4 | |||||
| G1-1\/2 | 32-38 | 12 | 47.8 | 37 | 57/55 | HX-NPG1-1/2 | |||||
| G2 | 37-44 | 14 | 59.6 | 38 | 64 | HX-NP.G2 | |||||
| G2-1/2 | 42-52 | 16 | 75.1 | 42 | 78/80 | HX-NPG2-1/2 | |||||
| G3 | 65-70 | 18 | 87.8 | 45 | 94 | HX-NP.G3 | |||||
| G4 | 88-95 | 20 | 113.0 | 53 | 130 | HX-NP.G4 | |||||
| NPT1/4 | 3-6.5 | 6.5 | 13.6 | 13.5 | 14/15 | HX-NP.NPTI/4 | |||||
| NPT3/8 | 48 | 8 | 17.0 | 17 | 18/19 | HX-NP.NPT3/8 | |||||
| NPT1/2 | 6-12 | 8 | 21.2 | 22 | 22 | HX-NP.NPT1/2 | |||||
| NPT3/4 | 13-18 | 9 | 26.5 | 25 | 30 | HX-NP.NPT3/4 | |||||
| NPT1 | 18-25 | 10 | 33.2 | 29 | 40 | HX-NP.NPT1 | |||||
| NPT1-1/4 | 25-33 | 11 | 41.9 | 35 | 50 | HX-NP.NPT1-1/4 | |||||
| NPT1-1/2 | 32-38 | 12 | 48.0 | 37 | 57 | HX-NPNPT1-1/2 | |||||
| NPT2 | 37-44 | 14 | 60.0 | 38 | 64 | HX-NP.NPT2 | |||||
| NPT2-1/2 | 42-52 | 16 | 72.6 | 42 | 78 | HX-NPNPT2-1/2 | |||||
Ang mga modelo ng NPT ay maaaring i-customize ang sukat ng saklaw, karaniwan nang walang nuts at opsyonal ang mga ito.
Paglalarawan
