EN
Kovinski kabelski priključek
Trdovzdržljiv material: Izdelan iz kakovostnih kovin, kot so mesing in nerjavno jeklo, z visoko mehansko trdnostjo, odpornostjo na udarce, obrabo in korozijo. Prilagodljiv težkim industrijskim okoljem, kot so visoke temperature, vlažnost in prah, ter zagotavlja dolgo življenjsko dobo.
Odlična zmogljivost zaščite: Opremljen s popolno tesnilno konstrukcijo, praviloma dosegajo zaščitno raven IP65+ (nekateri visokorazredni modeli dosegajo IP67/IP68). Učinkovito zagotavlja zaščito proti prahu, vodi, olju in koroziji ter v celoti ščiti kabelske predušnike in notranje jedrne žice.
Varna in trdna povezava: Opremljen z visoko trdnimi stiskalnimi elementi; nekateri imajo dvojno zaklepanje ali protizdrsnih dizajnov, ki ponujajo odlične zmogljivosti pri vlečni trdnosti, proti vibracijam in navoru. Trdno pritrjuje kabli, da prepreči ohlajevanje ali odpad prosto zaradi dolgotrajne uporabe ali zunanjih sil.
Široka združljivost za različne aplikacije: Kompatibilen z različnimi kabelskimi specifikacijami in standardi navojev (metrični, imperialni, ameriški itd.). Enostavna namestitev (večinoma ročna sestava), pogosto uporabljena v industrijski avtomatizaciji, električni energiji, kemični industriji, pomorstvu, zunanjih inženirskih projektih in drugih scenarijih.
- Pregled
- Specificacije
- Opis
- Priporočeni izdelki
Pregled
Parametri izdelka
Dobrodošli na naše spletno stran, veseli smo, da vam lahko ponudimo storitve
| Primerna surovina: | Kosovano mesing | |||||
| Material za stiskalne čeljusti: | PA66 (Najlon), UL94-V2 | |||||
| Material za tesnilne komponente: | EPDM, silikonska guma | |||||
| Material O-obroča: | EPDM, silikonska guma | |||||
| Stopnja zaščite: | IP66-10 bar | |||||
| Temperatura: |
Statično stanje: -40 do 100 ℃, kratkotrajno do 120 ℃ Dinamično stanje: -20 ℃ do 80 ℃, kratkotrajno do 100 ℃ |
|||||
Specificacije
enota:MM
| Element | Razpon | Dolžina G L-nit | AG nit, zunanj premer | Dolžina spojke | Velikost ključa | Koda |
| M10×1.0 | 3-6.5 | 6.5 | 10.0 | 17 | 14 | HX-NP.M10 |
| M12×1.5 | 2-5 | 6.5 | 12.0 | 17 | 14 | HXNP.M12-15) |
| M12×1.5 | 3-6.5 | 6.5 | 12.0 | 17 | 14 | HX-NP.M12 |
| M12×1.5 | 4-8 | 8 | 12.0 | 18 | 17/14 | HX-NP.M12-8 |
| M14×1.5 | 3-6 | 8 | 14.0 | 18 | 17 | HX-NP.M14-(6) |
| M14×1.5 | 4-8 | 8 | 14.0 | 18 | 17 | HX-NP.M14 |
| M14×1.5 | 5-10 | 8 | 14.0 | 19 | 20/17 | HX-NP.M1410 |
| M16×1,5 | 3-6 | 8 | 16.0 | 19 | 18 | HXNP.M16-(6) |
| M16×1,5 | 4.8 | 8 | 16.0 | 19 | 18 | HX-NP.M16 |
| M16×1,5 | 5-10 | 8 | 16.0 | 19 | 20/18 | HXNP.M16-10 |
| M18 × 1,5 | 4-8 | 8 | 18.9 | 20 | 20 | HX-NP.M18-(8) |
| M18 × 1,5 | 5-10 | 8 | 18.0 | 20 | 20 | HX-NP.M18 |
| M18 × 1,5 | 6-12 | 8 | 18.0 | 21 | 20 | HX-NP.M18-12 |
| M20×1,5 | 5-10 | 8 | 20.0 | 21 | 22 | HX-NP.M20-(10) |
| M20×1,5 | 6-12 | 8 | 20.0 | 21 | 22 | HX-NP.M20 |
| M20×1,5 | 10-14 | 8 | 20.0 | 22 | 24/22 | HX-NP.M20-14 |
| M20×1,5 | 12-16 | 8 | 20.0 | 25 | 2722 | HX-NP.M20-16 |
| M22×1.5 | 4-8 | 8 | 22.0 | 22 | 24 | HX-NP.M22-8) |
| M22×1.5 | 8-12 | 8 | 22.0 | 22 | 24 | HX-NP.M22-(12) |
| M22×1.5 | 10-14 | 8 | 22.0 | 22 | 24 | HX-NP.M22 |
| M22×1.5 | 12-16 | 8 | 22.0 | 25 | 27/24 | HX-NP.M22-16 |
| M24×1,5 | 8-12 | 9 | 24.0 | 22 | 24/27 | HX-NP.M24-(12) |
| M24×1,5 | 10-14 | 9 | 24.0 | 22 | 24/27 | HX-NP.M24 |
| M24×1,5 | 12-16 | 9 | 24.0 | 22 | 27 | HX-NP.M24-16 |
| M25×1,5 | 10-14 | 9 | 25.0 | 22 | 24/27 | HX-NP.M25-14 |
| M25×1,5 | 12-16 | 9 | 25.0 | 25 | 27 | HX-NP.M25-16 |
| M25×1,5 | 13-18 | 9 | 25.0 | 27 | 30/27 | HX-NP.M25-18 |
| M25×1,5 | 15-22 | 9 | 25.0 | 29 | 35/27 | HX-NP.M25-22 |
| M27×1,5 | 12-16 | 9 | 27.0 | 27 | 30 | HX-NP.M27-(16) |
| M27×1,5 | 13-18 | 9 | 27.0 | 27 | 30 | HX-NP.M27 |
| M30×1,5 | 13-18 | 9 | 28.0 | 27 | 30 | HX-NP.M28 |
| M30×1,5 | 13-18 | 9 | 30.0 | 27 | 30/32 | HX-NP.M30 |
| M30×1,5 | 15-22 | 9 | 30.0 | 29 | 35/32 | HX-NP.M30-22 |
| M32×1,5 | 13-18 | 10 | 32.0 | 29 | 35 | HX-NP.M32-(18) |
| M32×1,5 | 14-20 | 10 | 32.0 | 29 | 35 | HX-NPM32-(20) |
| M32×1,5 | 15-22 | 10 | 32.0 | 29 | 35 | HX-NP.M32 |
| M32×1,5 | 18-25 | 10 | 32.0 | 31 | 40/35 | HX-NP.M32-25 |
| M33×1.5 | 15-22 | 10 | 33.0 | 29 | 35/36 | HX-NP.M33 |
| M36×1.5 | 18-25 | 10 | 36.0 | 31 | 40 | HX-NP.M36 |
| M37×1.5 | 18-25 | 10 | 37.0 | 31 | 40 | HX-NP.M37 |
| M40×1.5 | 18-25 | 11 | 40.0 | 31 | 40/45 | HX-NP.M40-25 |
| M40×1.5 | 22-30 | 11 | 40.0 | 35 | 45 | HX-NP.M40-30 |
| M40×1.5 | 25-33 | 11 | 40.0 | 37 | 50/45 | HX-NP.M40-33 |
| M42×1.5 | 22-30 | 11 | 42.0 | 35 | 45 | HX-NP.M42 |
| M47×1.5 | 18-25 | 11 | 47.0 | 37 | 50 | HX-NP.M47-(25) |
| M47×1.5 | 22-30 | 11 | 47.0 | 37 | 50 | HX-NP.M47-(30) |
| M47×1.5 | 25-33 | 11 | 47.0 | 37 | 50 | HX-NPM47 |
| M48×1.5 | 25-33 | 11 | 48.0 | 37 | 50/52 | HX-NP.M48 |
| M50×1,5 | 30-35 | 13 | 50.0 | 37 | 57/55 | HX-NP.M50-35) |
| M50×1,5 | 32-38 | 13 | 50.0 | 37 | 57/55 | HX-NP.M50 |
| M50×1,5 | 3744 | 13 | 50.0 | 38 | 64/55 | HX-NP.M50-44 |
| M54×1,5 | 32-38 | 13 | 54.0 | 37 | 57 | HXNP.M54 |
| M60×1,5 | 3744 | 14 | 60.0 | 38 | 64 | HX-NP.M60 |
| M63×1,5 | 30-35 | 14 | 63.0 | 38 | 64/68 | HXNP.M63-{35) |
| M63×1,5 | 3744 | 14 | 63.0 | 38 | 64/68 | HX-NP.M63 |
| M63×1,5 | 42-52 | 14 | 63.0 | 44 | 78/68 | HX-NP.M63-52 |
| M64×2.0 | 37-44 | 14 | 64.0 | 38 | 64/68 | HX-NP.M64 |
| M70×20 | 42-52 | 16 | 70.0 | 44 | 78 | HX-NP.M70 |
| M72×2.0 | 42-52 | 16 | 72.0 | 44 | 78 | HX-NPM72 |
| M72×2.0 | 48-58 | 16 | 72.0 | 44 | 78 | HX-NP.M72-58 |
| M72×2.0 | 55-62 | 16 | 72.0 | 45 | 88/78 | HX-NP.M72-62 |
| M75×2,0 | 42-52 | 16 | 75.0 | 44 | 78/80 | HX-NP.M75 |
| M75×2,0 | 48-58 | 16 | 75.0 | 44 | 78/80 | HX-NP.M75-58 |
| M80×2,0 | 55-62 | 18 | 80.0 | 45 | 88 | HXNP.M80 |
| M88×2,0 | 65-70 | 18 | 88.0 | 45 | 94 | HX-NP.M88 |
| M90×2,0 | 65-70 | 18 | 90.0 | 45 | 94 | HX-NPM90 |
| M100×2,0 | 78-84 | 20 | 100.0 | 53 | 110 | HXNPM100 |
| M110×2.0 | 82-88 | 20 | 110.0 | 53 | 120 | HX-NP.M110 |
| M120×2.0 | 88-95 | 20 | 120.0 | 53 | 130 | HX-NP.M120 |
| Navojne specifikacije je mogoče prilagoditi | ||||||
| Element | Razpon | Dolžina navoja GL | Zunanji premer navoja AG | Dolžina HJoin | Velikost ključa | Koda | |||||
| PG7 | 2-5 | 6.5 | 12.5 | 17 | 14/15 | HXNP.PG7-(5) | |||||
| 3-6.5 | 6.5 | 12.5 | 17 | 14/15 | HXNP.PG7 | ||||||
| 48 | 8 | 12.5 | 19 | 17/15 | HXNP.PG7-8 | ||||||
| PG9 | 3-6 | 8 | 15.2 | 19 | 17/18 | HX-NP.PG9-(6) | |||||
| 48 | 8 | 15.2 | 19 | 17/18 | HX-NP.PG9 | ||||||
| 5-10 | 8 | 15.2 | 21 | 20/18 | HX-NP.PG9-10 | ||||||
| PG11 | 48 | 8 | 18.6 | 21 | 20/21 | HX-NP.PG11-(8) | |||||
| 5-10 | 8 | 18.6 | 21 | 20/21 | HX-NP.PG11 | ||||||
| 6-12 | 8 | 18.6 | 22 | 22/21 | HX-NPPG11-12 | ||||||
| Pg13.5 | 5-10 | 8 | 20.4 | 22 | 22/23 | HX-NP.PG13.5-(10) | |||||
| 6-1210-14 | 88 | 20.420.4 | 2223 | 22/2324/23 | HX-NP.PG13.5HX-NP.PG13.5-14 | ||||||
| PG16 | 6-1210-14 | 88 | 22.522.5 | 2323 | 24/2524/25 | HX-NP.PG16-(12)HX-NR.PG16 | |||||
| 12-16 | 8 | 22.5 | 27 | 27/25 | HX-NP.PG16-16 | ||||||
| PG19 | 10-14 | 9 | 25.0 | 25 | 24/27 | HX-NR.PG19 | |||||
| 12-16 | 9 | 25.0 | 25 | 27 | HX-NPPG19-16 | ||||||
| PG21 | 48 | 9 | 28.3 | 27 | 30 | HX-NP.PG21-(8) | |||||
| 12-16 | 9 | 28.3 | 27 | 30 | HX-NP.PG21-(16) | ||||||
| 13-18 | 9 | 28.3 | 27 | 30 | HX-NP.PG21 | ||||||
| 15-22 | 9 | 28.3 | 29 | 35/30 | HX-NP.PG21-22 | ||||||
| PG25 | 15-22 | 10 | 32.0 | 29 | 35 | HX-NP.PG25 | |||||
| PG29 | 15-22 | 10 | 37.0 | 31 | 40 | HX-NP.PG29-(22) | |||||
| 18-25 | 10 | 37.0 | 31 | 40 | HX-NP.PG29 | ||||||
| 22-30 | 10 | 37.0 | 35 | 50/45 | HX-NP.PG29-30 | ||||||
| PG36 | 18-25 | 11 | 47.0 | 37 | 50 | HX-NP.PG36-(25) | |||||
| 25-33 | 11 | 47.0 | 37 | 50 | HX-NP.PG36 | ||||||
| 32-38 | 11 | 47.0 | 37 | 57/50 | HX-NP.PG36-38 | ||||||
| PG42 | 30-35 | 13 | 54.0 | 37 | 57 | HX-NP.PG42-(35) | |||||
| 32-38 | 13 | 54.0 | 37 | 57 | HX-NP.PG42 | ||||||
| PG48 | 3744 | 14 | 59.3 | 38 | 64 | HX-NP.PG48 | |||||
| 42-52 | 14 | 59.3 | 38 | 78/64 | HX-NP.PG48-52 | ||||||
| Element | Razpon | Dolžina navoja GL | AG nit, zunanj premer | Dolžina spojke | Velikost ključa | Koda | |||||
| G1/4 | 3-6.5 | 6.5 | 13.1 | 13.5 | 14/15 | HX-NPG1/4 | |||||
| G3/8 | 48 | 8 | 16.6 | 17 | 18/19 | HX-NP.G3/8 | |||||
| G1\/2 | 6-12 | 8 | 20.9 | 22 | 22/23 | HX-NPG1/2 | |||||
| G3/4 | 13-18 | 9 | 26.4 | 25 | 30 | HX-NP.G3/4 | |||||
| G1 | 18-25 | 10 | 33.2 | 29 | 40 | HX-NP.G1 | |||||
| G1-1/4 | 25-33 | 11 | 41.9 | 35 | 50 | HX-NPG1-1/4 | |||||
| G1-1/2 | 32-38 | 12 | 47.8 | 37 | 57/55 | HX-NPG1-1/2 | |||||
| G2 | 37-44 | 14 | 59.6 | 38 | 64 | HX-NP.G2 | |||||
| G2-1/2 | 42-52 | 16 | 75.1 | 42 | 78/80 | HX-NPG2-1/2 | |||||
| G3 | 65-70 | 18 | 87.8 | 45 | 94 | HX-NP.G3 | |||||
| G4 | 88-95 | 20 | 113.0 | 53 | 130 | HX-NP.G4 | |||||
| NPT1/4 | 3-6.5 | 6.5 | 13.6 | 13.5 | 14/15 | HX-NP.NPTI/4 | |||||
| NPT3/8 | 48 | 8 | 17.0 | 17 | 18/19 | HX-NP.NPT3/8 | |||||
| NPT1/2 | 6-12 | 8 | 21.2 | 22 | 22 | HX-NP.NPT1/2 | |||||
| NPT3/4 | 13-18 | 9 | 26.5 | 25 | 30 | HX-NP.NPT3/4 | |||||
| NPT1 | 18-25 | 10 | 33.2 | 29 | 40 | HX-NP.NPT1 | |||||
| NPT1-1/4 | 25-33 | 11 | 41.9 | 35 | 50 | HX-NP.NPT1-1/4 | |||||
| NPT1-1/2 | 32-38 | 12 | 48.0 | 37 | 57 | HX-NPNPT1-1/2 | |||||
| NPT2 | 37-44 | 14 | 60.0 | 38 | 64 | HX-NP.NPT2 | |||||
| NPT2-1/2 | 42-52 | 16 | 72.6 | 42 | 78 | HX-NPNPT2-1/2 | |||||
Modeli NPT so razpon velikosti, ki jih je mogoče prilagoditi; standardno brez matic, ki so opcijske.
Opis
