One small but important part however is this 32mm nylon gland, which provides a means of protection for the cables where they enter into machinery or electrical boxes. It helps prevent water or dust, dirt from entering inside it and protect them. Constructed of high strength nylon, this gland is light duty but tough enough to handle the rigors of most industrial environments. At HongXiang, we ensure no 32mm nylon cable gland is too tight to be used, or wears out to soon. It’s those glands you want when you need to keep cables safe and secure, particularly in the type of locations where machinery runs around the clock and is subject to harsh conditions. By choosing the correct gland, there is less risk of damage and fewer repairs, saving time and money.
It isn’t always easy to find a 32mm nylon gland for industrial work. First, you have to consider the size of that cord. If the gland is too tight, it won’t fit; if it’s too loose, dust or water could infiltrate. At HongXiang we rigorously test and measure every single gland to ensure the fit perfectly with cable size. Another thing is the material. Nylon is ideal because it is resistant to chemicals and doesn’t rust like metal. But not all nylons are created alike. Some of them may be better at withstanding heat, others perhaps don’t crack as easily when missed. You need a gland that’s strong even if the machine is vibratory or it’s outside in the sun. (On occasion, the type of thread is neglected. The gland should screw in tightly into the machine or box. Incorrect threading could lead to leaks, or separation of the gland. With HongXiang, we offer guidance on which thread works best for you so that you don't end up with a piece you can't use. Also, think about the environment. If the glands go below water or into oily spots, they need to be sealed a different level. Some of the glands have little rubber rings which are supposed to prevent water from entering. Finally, check the temperature range. Some machines heat, so gland shall not melt or soft. Picking the right gland requires care and knowing what the job calls for. That’s why HongXiang designed its 32mm nylon glands to suit a variety of situations, and ensure that the cables inside are kept safe come rain or shine.
Fitting a 32mm nylon gland can be awkward. There are people we all know who get it wrong and cause trouble. For instance, if you really jam the cable through the gland too hard, of these cases can result in damage, such as cracking to the nylon, or squishing up its inner rubber ring so much that it may no longer seals. It is also an issue if the water tight gland isn’t tight enough. If it does, water or grime can seep in and destroy the gear. But over-tightening is incorrect as well because it can snap the nylon threads or damage the cable. You want to get the right tightness, and experience plays a big part in that. Occasionally, sure, they grab the incorrect size gland and don't verify the diameter of the cable. That’s a big no-no because either too much space around the cable allows leaks, or the gland can’t close properly. In addition, if the cable is sharp or rough, it may damage the sealing ring of the gland. Before install, slurry the cable edges to avoid this. Another difficulty is the disregard of the environment of use of this gland. If it is a damp or dusty place, extra care must be taken to ensure that seals are perfect. We at HongXiang advise regular inspection of the gland following installation, particularly when working in harsh environments to detect worn and damaged parts early. The right tools are also crucial. Others attempt to insert glands with pliers or incorrect wrenches, which can damage the gland. At HongXiang, we advise on the appropriate tools to ensure the job is done correctly and avoid any damage to gland or cable. These little things can help you to keep your gears safe and well working for longer time.
In tough places such as factories, construction sites or outdoor jobs where the weather can be harsh; it’s important to use parts that can stand up. One of those is the 32mm nylon gland. A nylon glands are devices to secure and protect an electrical cable where it goes into a machine or box. They’re called 32mm not because they start the number, but because they fit cables that are roughly 32 millimeters in width. At HongXiang we supply quality 32mm nylon glands which are very effective in severe environments.
The largest perk of using 32mm nylon glands is how they are water-proof and dust-proof. In rough conditions, cables can get wet, dirty or splashed with chemicals. Those are kept at bay by nylon watertight cable gland from HongXiang; so too are these other harmful substances, which is why the cold water hot bed wires stay safe and work well. It keeps you from having accidents such as short circuits or damage of appliances.
When you buy a lot of 32mm nylon glands at once, then it’s on a wholesale basis. As a consequence of doing this, the price per gland comes down. Reasons being that companies like HongXiang the cost goes down when you order in bulk. So if you need many glands because you have a big job in front of you, buying wholesale makes it possible to get the parts cheaper.
There is also the planning aspect of wholesale purchasing, he added. If you have an idea of the number of glands you will be using going forward, purchasing them all at once will keep a stock on hand. That way, you don’t end up making a last-minute purchase that’s either pricier or slower to arrive.
Copyright © Zhejiang Hongxiang Connector Co., Ltd. All Rights Reserved - Privacy Policy
EN